Roberts Rebuilds

Reground head slides on G&L Horizontal Boring mill
Head cross slide off a G&L Horizontal Boring Mill
Checking the cross rail on a SIP MPK 3 Jig Bore
Checking the cross rail on a SIP MPK 3 Jig Bore
8 X 18 Hydraulic surface grinder in for a rebuild
12ft vertical boring mill
Milling Rulon on the V ways of a lathe carriage on our Devlieg Jigmill
Milling Rulon on the V ways of a lathe carriage on our Devlieg Jigmill
Milling the dovetail on a Bridgeport knee
Milling the dovetail of a Bridgeport on our Devlieg Jigmill
Milling the flats on a Bridgeport knee
Our Devlieg Jigmill
The Devlieg
Moore Jig Grinder
Tschudin OD grinder
Tschudin OD grinder
Red highlighter and blue making compound
Hardinge bench lathe compound
1/4 sec spindle mirror
Straight edges from 6 inches to 8 feet
Electronic differential levels expedite the inspection of ways and their aliment
Precision levels sized to fit the job
compound slide from a Hardinge Cataract bench lathe
Custom designed and made gage set to inspect the alignment of ways
Head cross slide off a G&L Horizontal Boring mill
Milling Rulon to hight prior to scraping
Precision scraped table on a SIP Jig Bore
Using an Autocollimator to check the spindle alignment
10 foot dia table bearing on VBM
King way aliment tool
Prismatic reflections, 40 points per inch
Surface plate marked up for final scraping

About Us